DIGITUS
®
KVM Switch Module for modular based TFT consoles
25
Cascaded 8-Port DIGITUS® KVM Switch Modules
For OSD menu:
After connection completes, you should re-activate
the OSD menu to check if the Master recognizes the
Slaves. A triangle mark (4) is placed to the right
of the channel name indicating the port is connected
to a Slave not a computer. A number to the left of
the triangle mark indicates the Slave Module, i.e.
84 for an 8-port Switch Module.
Change Configuration while Running
A device (a computer or a KVM Switch Module) at any 'PC x' port can be changed at
any time after initial power-up. If you change any one of the “PC 1” to “PC 8” ports
connection from a computer to a Slave or vice versa, or replace the devices of a
port; the OSD will update this change the next time it is activated.
Note: Any new device must be turned off before it is connected to the Master.
Comments to this Manuals