Digitus DS-14210 Specifications download pdf (Page 19)

DIGITUS

KVM Switch Module for modular based TFT consoles

marked with a triangle (4) indicating there are options to choose from. Using

the “ é ” and “ ê “ arrow keys, select the functions and press ENTER .

Available options will be shown in the middle of the screen. Again, using the

“ é ” and “ ê “ arrow keys to view options then press ENTER to select it.

You can press ESC to exit at any time.

n Auto Scan

In this mode, the DIGITUS® automatically switches from one power-on

computer to the next sequentially in a fixed interval. During Auto Scan

mode, the OSD displays the name of the selected computer. When Auto

Scan detects any keyboard or mouse activity, it suspends the scanning till

activity stops; it then resumes with the next computer in sequence. To

abort the Auto Scan mode, press the left Ctrl twice, or, press any front

button. Scan Type and Scan Rate set the scan pattern. Scan Type

( F4 :More\Scan Type) determines if scanned computers must also be

eye mark selected. Scan Rate ( F4 :More\Scan Rate) sets the display

interval when a computer is selected before selecting the next one.

n Manual Scan

Scan through power-on computers one by one by keyboard control. Type

( F4 :More\Scan Type) determines if scanned computers must also be

eye mark selected. Press the up arrow key “ é ” to select the previous

computer and the down arrow key “ ê ” to select the next computer.

Press any other key to abort the Manual Scan mode.

n Audio Stick

An optional multimedia Module can be LINKed to the back of each

DIGITUS® KVM Switch Module for selecting microphone and stereo

speaker signals. There are two options for Audio Stick: ON and Off.

When set to 'On', audio selection follows computer selection. When set to

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 32 33

No comments

Digitus DS-14210 Specifications Page 19