DIGITUS
®
KVM Switch Module for modular based TFT consoles
24
-------------------- Cascade Configuration
Connection
Before connecting a device (a computer or a Slave KVM Switch Module) to the
Master DIGITUS® KVM Switch Module under power, you must turn off the device.
Note: The Master must have equal or more 'PC x' ports than that of the Slave, i.e., if
DS-13210 is the master, DS-13210 can be a Slave, but not the DS-14210.
The ports labeled "PC 1"~”PC 8” can be connected to either a computer or a Slave's
LOCAL (or CONSOLE) port, as shown below. The ports “PC A"~”PC H” can only be
connected to computers.
Slave Console Connection
Note: Only Master’s PS/2 PC ports (not USB ports) can be connected to a Slave’s
LOCAL (or CONSOLE) port for cascade application.
The maximum number of computers controlled by a master/slave configuration with
all 8-port units is 64 -- with 8 Slaves and each Slave connects to 8 computers, see
figure below.
Comments to this Manuals