Digitus DS-14210 Specifications download pdf (Page 16)

DIGITUS

KVM Switch Module for modular based TFT consoles

------------------------ Operation

Push-Buttons

A computer may be selected by pressing the push button directly, by issuing hotkey

commands or by activating the OSD window. The indicator changes to reflect the

computer port selected (red). The indicator flashes red when it is in either Auto Scan

or Manual Scan mode.

Note: For 16-port Modules: 1 ~ 8 represent the lower 8 ports and A ~ H for the

higher 8 ports. Push the same button twice for higher 8 ports, for example, push

button 1 twice for port A, and so forth. OSD menu and hotkeys are available for

computer selection.

n K/M RESET

K/M RESET solves most problems developed by keyboard, mouse, device

replacement, or change of configuration. Press down both the front-panel number

1 and 2 push-buttons for 2 seconds to re-configure the whole system without

turning either the DIGITUS® KVM Switch Module or any computer off.

n AUTO SCAN

DIGITUS® KVM Switch Module provides an easy to use feature to start Auto

Scanning. You can press down both the front-panel number 7 and 8 buttons

for 2 seconds to start Auto Scanning. For 4-port modules, press number 3 and

4 instead.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 32 33

No comments

Digitus DS-14210 Specifications Page 16