Digitus DS-14215 Specifications download pdf (Page 66)

Have your model and serial number on hand. When asked, supply the technician with the code listed

under Purchase Options at the bottom of the Firmware and flash memory management page.

Once the order is processed, the technician will provide you with an Unlock code. Enter that code in

the space provided, and click Submit. The system will update itself to allow IPMI configuration.

You can use either serial port on the Digital KVM via IP to send IPMI access; your choice will dictate

the type of cable you will use to make the connection. The DTE Serial port on the front panel requires

the use of a null modem

serial cable.

Connect a female end of a serial cable to the serial port that is configured for IPMI access on the host

computer. Connect the opposite end to the DTE Serial port of the Digital KVM via IP.

Configuring IPMI on the Digital KVM via IP

Once you have connected the IPMI-configured serial port to the Digital KVM via IP and enabled the

software option, you can begin to configure IPMI settings through the Web interface.

IPMI/IPMB setup (Intelligent Platform Management).

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 75 76

No comments

Digitus DS-14215 Specifications Page 66