Digitus DN-7041 Datasheet

880022..1111gg MMIIMMOO WWiirreelleessss LLAANN PPCC CCaarrdd User Manual Version: 1.0 (October, 2005)

5 C. In Windows XP, there is a “Windows Zero Configuration Tool” for you to setup wireless cards. You can choose to configure the card through the Z

6 F. The system will automatically detect the card. When finish, please click “Finish” to complete the installation.

7 3 Configuration Utility The Configuration Utility is a powerful application that helps you configure the PC card and monitor the link status and t

8 In Windows XP, there is a “Windows Zero Configuration Tool” for you to setup wireless clients. If you want to switch the configuration utilities, p

9 Note: If “Wireless Zero Configuration” is enabled, you can only configure the advance setting or check the link status and statistics from the co

10 Parameter Description Available Networks This list shows all available wireless networks within range of your card. It also displays the informat

11 Parameter Description Profiles List The profiles list display all the profiles and the relative settings of the profiles including Profile Name,

12 Parameter Description PSM (Power Saving Mode) The power saving function is only available when the network type is in Infrastructure. CAM (Consta

13 Parameter Description RTS Threshold Minimum packet size required for an RTS (Request To Send). Forpackets smaller than this threshold, an RTS is

14 Parameter Description Authentication Type LEAP – LEAP is a pre-EAP, Cisco-proprietary protocol, with many of the features of EAP protocols. Cisco

COPYRIGHT Copyright ©2005/2006 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed,

15 Parameter Description Encryption Mode None – Disable the encryption mode. WEP – Enable the WEP Data Encryption. When the item is selected, you h

16 The IEEE 802.1X specification describes a protocol that can be used for authenticating both clients and servers on a network. The authenticatio

17 3.2.1.3 802.1x Setting-Certification Parameter Description Authentication Type The EAP authentication protocols this card has supported are incl

18 Parameter Description Tunneled Authentication Protocol When the authentication type is PEAP or TTLS, select a protocol to be used to build

19 Parameter Description Allow Intermediate Certificates A server designates an issuer as a trusted root authority by placing the issuer's self

20 Parameter Description Status Display the SSID and MAC ID of the network the card is connecting to. Extra Info Display the link status. Cha

21 3.4 Statistics This option enables you to view the statistic information of the connection including transmit statistics and receive statistics. Y

22 Parameter Description Wireless Mode 802.11 B/G mix – If you have a mix of 802.11b and 802.11g wireless stations in your network, it is recommende

23 Parameter Description Enable TCP Window Size The TCP Window is the amount of data a sender can send on a particular connection before it gets an

24 3.6 About By choosing this option, you can click the hyperlink to connect the website for the information of the wireless chipset vendor and revie

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital dev

25 3.8 WMM Function In addition to the Turbo Mode, this card also supports WMM function. When you use the devices such as Voice over Internet Protoco

26 B. Right Click the “Wireless Network Connection” and select “Properties”. C. Click “Configure…”. D. Select “Advanced” page, enable the “WMM

27 4 Troubleshooting This chapter provides solutions to problems usually encountered during the installation and operation of the adapter. 1. Wh

28 6. What is BSS ID？ A specific Ad hoc LAN is called a Basic Service Set (BSS). Computers in a BSS must be configured with the same BSS ID. 7. W

29 13. What is Spread Spectrum？ Spread Spectrum technology is a wideband radio frequency technique developed by the military for use in reliable, se

Federal Communications Commission (FCC) RF Exposure Requirements SAR compliance has been established in the laptop computer(s) configurations with P

CONTENTS 1 INTRODUCTION...1 1.1 Features...

1 1 Introduction Thank you for purchasing the 802.11g MIMO Wireless LAN PC Card. With the MIMO technology, this card enables you to connect to wirel

2 1.1 Features • Works with both IEEE 802.11b and IEEE 802.11g products. • High-speed transfer data rate - up to 54Mbps. • Farther coverage, les

3 1.3 Package Contents Before you begin the installation, please check the items of your package. The package should include the following items: •

4 2 Installation Procedure Before you proceed with the installation, please notice following descriptions. Note1: Please do not install the card int